2005 Toyota Sequoia
Mileage
218,168
Service Date
10/16/2023
Services Performed
- Removed colmun cover and found shifter housing assembly is damaged / broken, recommending replacing shifter assembly.
- Found shifter housing broken, causing wipers to activate due to additional shifter housing movement.
- General Inspection – Priority list – Priority One. 1 shift linkage. 2 brake flush. 3 oil change. Priority Two. 1 front end inspection and tire rotate. 2 wiper blades. 3 lower oil pan. 4 diagnose codes and clear all other. Priority Three. 1 brake inspection. Inspection Findings – SEL- Code list – antilock brake codes c1223, c1247. tire pressure monitoring codes z2121, c2122, c2123, c2125, c2142. recommending to diagnose ABS codes and clear all other Oil Life % – cannot make our oil change sticker out Wiper Blades – wiper blades are a little worn recommend to replace. Brake Fluid – brake fluid is a little contamination recommend performing flush. Tire pressure & condition – tires have some inside recommend performing for an inspection. By time and / or mileage. – manufacturers recommending to perform brake inspection, tire rotate, and oil change.
- Removed and replaced shifter assembly, did notice that new shifter assembly is a heavier metal which should help prevent this from happening again. Retest confirm shifter now functioning without interfering wiper arm.
- Lifted car and started to drain oil, once oil was done draining, removed skid plate and replaced oil filter, tightened oil filter and drain plug down and cleaned off. Replaced skid plate and lowered vehicle, filled up with 5w30 synthetic blend with a can of BG MOA oil additive, 6.5 quarts. Started vehicle and checked oil level, replaced sticker and reset maintenance light.
Gerlinde E. gave our service a 5 star review on 10/17/2023
