- General Inspection – Priority List – Priority One : 1 – brake repairs, 2 – oil change with epr engine flush. Priority Two : 1 – replace air filter, 2 – replace cabin air filter, 3 – replace license plate bulb. Priority Three : 1 – ignition tune up. 2. Recall for Fuel Pump Relay Inspection Findings – SEL- Code list – During pre scan found multiple codes in multiple modules, recommend performing oil change service, clearing all codes and re-evaluating at next service. Cabin air filter – Cabin air filter replacement is recommended by time and mileage. Lights (Head, Brake, Turn) – Driver side rear license plate light is inop; recommend replacing. Engine Oil – Found engine oil not registering on dipstick, according to oil change sticker vehicle is about 4000 miles overdue on oil change, recommend BG EPR engine flush in combination with oil change. Air Filter – Air filter is restricted with fine dust, recommend installing a new air filter. Spark Plugs / Wires – Ignition tune-up is recommended by time and mileage. Battery Condition – Battery is inaccessible, unable to test at this time. Cables / Connections – Battery is inaccessible unable to expect at this time. Brakes (Pads/Shoes) – See brake inspection notes for details.
- Brake inspection – During first initial road test up and down the road verified brakes are grinding, suspect front driver side affected the most. Front Brake Condition – Found driver side front rotor is damaged due to metal on metal contact, verified no issues found with calipers, recommend replacing front pads and rotors. Rear Brake Condition – Found rear brake pads are worn to 4 mm, rear rotor thickness is close to minimum specs, verified caliper function, recommend replacing rear pads and rotors.
- DISC ROTOR – Remove & Replace – Front,Both – [Includes: Repack Wheel Bearings (where applicable) and replace Pads (if necessary). DOES NOT include refinishing.]
Stephanie H. gave our service a 5 star review on 8/10/2021